Відео

Thanks! I'm nearly 60 and made it through the carburetor age without issue. My 1965 Cub Cadet and 2002 Honda mowers have never had issues. Garaged and always fueled. Got an '81 Honda Passport and '71 Trail 90 and suddenly I need to know everything there is to know about small-bore carbs! Liked and subscribed!! AWESOME DEEP-DIVE!!!!! (yes, I'm screaming)

Just bought me an XR150 a few weeks ago and love it! I’m about to do exhaust, jets, and air box mod to open it up a bit. This may be next on my list! I will say mine fires right up in one or two cranks with no choke and it’s all stock so not sure why yours is so hard or running so lean. Seems more to me like your pilot jet is gunked up a bit or something…lol. Was awesome to see some actual Dyno numbers on the little bike for sure!

7hj4gh3hj4hjh3hh

Went to shift with the brake foot 😅

I had a Taiwanese 63cc kit on mine and drilled out the jet. Once the exhaust broke off the thing became a banshee. Was faster than 70cc kitted mopeds with a pipe in both acceleration and top speed. Thing was wicked fast for what it was, 50mph easy

Too late this year but next year need to organize a meet up and ride in Sturgis. It'd be $$$

Congratulations

👍👍👍👍

would be cool if you guys setup just a camera for time-lapse of the move in

is it possible to use this mount on a qs mid drive motor for my electric ruckus

Cool update! good luck with the move and everything!

awesome upgrade man, congrats

NICELY DONE

Just got 2600miles for my 2 months old xr 150L 2024 Last ride was 620miles loop trip. No prblem at all since its brandnew, still looking for my right setup in long rides

Just got 2600miles for my 2 months old xr 150L 2024 Last ride was 620miles loop trip.

Hey dude i have a aerox 100 2002 and its cool but the acceleration is terrible how do.i improve this already has a race exhaust but only recently bought it so dont know if its bin rejettet runs decent but only picks up decent speed around 40 and takes a while to get there dont want to tune it so much it blows up just wanna improve acceleration

I have the same scooter where can I find the starter and the kick start assembly

Wryyy

Did you ever make the exhaust?

do you still have this mounts available?

Hallo.

Recently bought a scooter and been searching for this video for some time. Good job explained all ive been wondering about. Keep up the good work. 👍

Is the only thing needed for this the 222cc kit off your site and the jets?

More videos, more often. Pour the favor.

Two stroke

Купил xr 125 в 2013году ,проехал 50 000км ,в 2024 поменял на xr 150 , надежный, простой .браво honda за то что по сей день. выпускают этот байк.стоимость в Украине 2500$

I've been "road tripping" around the Philippines Islands with my 2023 XR150 for 16 months now....what a Fun bike..!!! (Philippines price?..$1,435.00usd total, 3yrs Plate and Insurance included)👍🏼

do you guys use aerox handlebar stems for these?

We got one in Inuvik, at the North end of the Dempster highway. Does well in loose gravel and gas-range is wow! Can do Dawson city to Eagle Plains on a tank, if you're not bombing.

Good informative vid man. So I have a stock sym jolie dd50 about to get a 75cc big bore where can I buy the jets, springs etc etc from you I'm in Australia so hopefully that's not a problem. Thanks in advance

Aside from the non factory handlebar/headlight set-up, that's a sweet little spree!

I'd like to see you test switching to Amsoil synthetic after an initial break in with conventional oil on some 2 strokes or 4. I just bought one of these XR150L's and plan to switch. I picked up some mph on several 2 stroke 50cc motors switching to Amsoil synthetic after initial breaking it in using conventional oil, experiencing a 2nd break in w/ Amsoil, and ultimately the resulting increase in speed. Motors sounded better and lasted longer as well. I hope the same happens with my XR150L. I have built a lot of 50 cc bike mopeds and doing the , what I call a "double break in" (DBI) just described, seemed to add 5-8 mph. Thing is going to synthetic on a 50cc with lots of miles did not get the same benefit. Wish I had this system to test exactly how it improved using the DBI.

roof top garden van 😂

PSX honda, это лучший в своём классе!

Jth4hj4hjt4hj4hcjh4hj4hjjj3jjjj4jhbhj3jj4jj 11:11

Jj4y4hjr43hjch3hj 10:54

Hay I have a adly rt50 and I’m I’m trying to kit it out to a 70 what kit do I have to buy please help me out thank you

What are the benefits of this carb.?? How is it better than stock.. convince me and I’ll buy one..

The Maddog bikes use the GY6 engine. That engine is modeled after an engine that Honda built. Maddog bikes are great if you can use tools. I have 106 miles on my Gen V Maddog. It's never broken down.

Do you have a video SHOWING the clutch grab/ engine shifting that you're talking about??

I order the same parts off amazon free shipping

Big like for this video. Do you have any idea why Polini and others are making clutches without cooling fins ? I just bought a Polini Sport clutch without cooling fins for my 2023 Vespa GTS , but i also put the Polini Clutch Bell Speed Evolution wich has better cooling power than the original bell . After 500 km all looks and feels very good , but i still wonder why there are clutches without cooling fins ...

What is a good temp range? I have an athena race head.. it never gets above 260 F° should I lean it out?

No constant oiling needed as there are no chains. has simple parts. unlike cvts in cars, cvts in motorcycles are super reliable as that rubber belt has way less power to manage than those poor metal belts in cars which have to transmit at least 100hp to a 1.5 ton car. has no problems with crossing waters as tranny has its own cover. cheap to own and cheap to maintain. easy to use and comfortable. scooters are awsome

Very helpful. You answered the 3 questions I had. #Pro 😎

where can i buy the thing next to the half sprocket? drive face or simething mine doenst have that 0_0

is this exhuast high up ?

Looks like i was the only one noticing you put the bearing in the wrong half of the case 🙃 that bearing has to go on the variator side .. anyway vid 2years old, hope you corrected that in future builds.

Hi new followers ask lang maingay puba talaga pag naka regrind cams?

Man, that sounds so badass